EMRP: Reports to Process

Can't be bothered to update all those EMRP pages by yourself? Then don't. Let the EMR Bot do it for you.

You can paste entire batches of reports from your events log onto this page. It takes just one edit here rather than two (or more) per report if you do it manually. Just follow the instructions below.

Adding Reports

Correct Formatting is VITAL!

Adding a Batch of New Reports

Create a level 3 heading with 5 tildes as the title, this will insert a timestamp. Like this but without the brackets: (===~~~~~===). Paste your reports underneath this new heading.

Take Note of these Points

-- If there are no reports to process, remove any comments under the "Reports to Process" header when you add more.

-- Avoid posting duplicate reports where possible. Check the recently processed list at the bottom of the page.

-- If the reports are old enough that the timestamp isn't that accurate, sign with 5 tildes anyway, save, then edit the timestamp.

Example

Here's an example of what the page code should look like after you save it:

==Report to Process==

===18:18, 2 July 2008 (BST)===

25.96 MHz: "... leaving Reganbank, counted about forty outside ... they're just wandering around ... can't see any signs of life ... the whole suburb's wrecked ..." (5 hours and 36 minutes ago)

===14:18, 4 July 2008 (BST)===

25.96 MHz: "... reporting from Pashenton, I've got twenty or so active ... they're just wandering around ... lights are on across the suburb ... infrastructure looks intact too ... the Lance Building has power ..." (19 hours and 36 minutes ago)

25.96 MHz: "... can see about eighty on the streets of Ketchelbank ... a few big groups, but they're spread out ... a few buildings with lights on ... serious collateral damage ..." (17 hours and 56 minutes ago)

Reports to Process

16:54, 29 September 2010 (BST)

25.96 MHz: "... can see around a hundred and fifty on the streets of Osmondville ... a few big groups, but they're spread out ... only one building with lights on ... most of the buildings are ruined ... the Axtence Building is out of action ..." (7 hours and 14 minutes ago)

25.96 MHz: "... can see around a hundred and fifty on the streets of Osmondville ... a few big groups, but they're spread out ... only one building with lights on ... most of the buildings are ruined ... the Axtence Building is out of action ..." (3 hours and 34 minutes ago)

25.96 MHz: "... over a hundred in Wyke Hills ... mostly just stragglers, no organised groups ... no lights on down there ... the whole suburb's wrecked ... the Needs Building is out of action ..." (2 hours and 34 minutes ago)

25.96 MHz: "... can see a hundred or so on the streets of Vinetown ... mostly just small groups ... a few buildings with lights on ... heavy structural damage ... Mitchem Mall is looking wrecked ..." (2 hours and 14 minutes ago)

06:11, 29 September 2010 (BST)

25.96 MHz: "... can see twenty or so on the streets of Gatcombeton ... they're just wandering around ... several buildings with power ... some minor structural damage ... Calvert Mall is being held ..." (19 hours and 31 minutes ago)

25.96 MHz: "... leaving Foulkes Village, counted maybe seventy outside ... mostly just small groups ... no lights on down there ... most of the buildings are ruined ..." (10 hours and 31 minutes ago)

25.96 MHz: "... Lerwill Heights is still active, maybe fifty on the streets ... maybe a dozen outside Tarasius General Hospital ... a lot of buildings with lights on ... some minor structural damage ..." (9 hours and 11 minutes ago)

25.96 MHz: "... can see maybe fifty on the streets of Roftwood ... mostly just stragglers, no organised groups ... can't see any signs of life ... the whole suburb's wrecked ... the Herbert Building is out of action ..." (8 hours and 31 minutes ago)

25.96 MHz: "... leaving Roachtown, counted about sixty outside ... a few big groups, but they're spread out ... a lot of buildings with lights on ... some minor structural damage ... power's on at the Chudley Building ... the Haim Building is in bad shape ..." (6 hours and 31 minutes ago)

25.96 MHz: "... about forty in Crooketon ... they're just wandering around ... only one building with lights on ... the whole suburb's wrecked ..." (1 hour and 11 minutes ago)

09:18, 28 September 2010 (BST)

25.96 MHz: "... can see around a hundred and fifty on the streets of Wyke Hills ... a few big groups, but they're spread out ... can't see any signs of life ... the whole suburb's wrecked ... the Lodder Building has fallen ..." (18 hours and 38 minutes ago)

25.96 MHz: "... reporting from Lukinswood, I've got thirty or so active ... maybe a dozen outside the Coram Building ... a lot of buildings with lights on ... only a few buildings damaged ... the Stagg Building has lights on ..." (17 hours and 58 minutes ago)

25.96 MHz: "... reporting from Lukinswood, I've got about forty active ... maybe a dozen outside the Coram Building ... a lot of buildings with lights on ... only a few buildings damaged ... the Stagg Building has lights on ..." (15 hours and 58 minutes ago)

25.96 MHz: "... a hundred or so in Ruddlebank ... a few big groups, but they're spread out ... no lights on down there ... it's a wasteland down there ... the Cheeke Building is down ..." (8 hours and 58 minutes ago)

25.96 MHz: "... reporting from Randallbank, I've got about forty active ... mostly just small groups ... several buildings with power ... serious collateral damage ..." (6 hours and 38 minutes ago)

25.96 MHz: "... reporting from Dentonside, I've got maybe fifty active ... a few big groups, but they're spread out ... a lot of buildings with lights on ... infrastructure looks intact ... Tolman Power Station has lights on ..." (1 hour and 18 minutes ago)

Recently Processed

11:21, 27 September 2010 (BST)

25.96 MHz: "... can see about eighty on the streets of Old Arkham ... they're just wandering around ... only one building with lights on ... the whole suburb's wrecked ... the Button Building is out of action ..." (59 seconds ago)