EMRP: Reports to Process: Difference between revisions

From The Urban Dead Wiki
Jump to navigationJump to search
No edit summary
No edit summary
Line 45: Line 45:


==Report to Process==
==Report to Process==
===12:22, 27 May 2009 (BST)===
25.96 MHz: "... crossing Huntley Heights now, can see about sixty down there ... mostly just small groups ... a few buildings with lights on ... heavy structural damage ... the Vicari Building has definitely fallen ..." (21 minutes ago)
===02:43, 27 May 2009 (BST)===
===02:43, 27 May 2009 (BST)===
25.96 MHz: "... can see thirty or so on the streets of Peppardville ... all stragglers, no groups ... a lot of buildings with lights on ... serious collateral damage ... the Maine Building is operational ... Fort Creedy is out of action ..." (2 minutes ago)
25.96 MHz: "... can see thirty or so on the streets of Peppardville ... all stragglers, no groups ... a lot of buildings with lights on ... serious collateral damage ... the Maine Building is operational ... Fort Creedy is out of action ..." (2 minutes ago)

Revision as of 11:22, 27 May 2009

Can't be bothered to update all those EMRP pages by yourself? Then don't. Let the EMR Bot do it for you.

You can paste entire batches of reports from your events log onto this page. It takes just one edit here rather than two (or more) per report if you do it manually. Just follow the instructions below.

Adding Reports

Correct Formatting is VITAL!

Adding a Batch of New Reports

Create a level 3 heading with 5 tildes as the title, this will insert a timestamp. Like this but without the brackets: (===~~~~~===). Paste your reports underneath this new heading.

Take Note of these Points

-- If there are no reports to process, remove any comments under the "Reports to Process" header when you add more.

-- New batches of reports should go under older batches, to maintain chronological order.

-- Avoid posting duplicate reports where possible. Check the recently processed list at the bottom of the page.

-- If the reports are old enough that the timestamp isn't that accurate, sign with 5 tildes anyway, save, then edit the timestamp.

Example

Here's an example of what the page code should look like after you save it:

==Report to Process==
===18:18, 2 July 2008 (BST)===
25.96 MHz: "... leaving Reganbank, counted about forty outside ... they're just wandering around ... can't see any signs of life ... the whole suburb's wrecked ..." (5 hours and 36 minutes ago)
===14:18, 4 July 2008 (BST)===
25.96 MHz: "... reporting from Pashenton, I've got twenty or so active ... they're just wandering around ... lights are on across the suburb ... infrastructure looks intact too ... the Lance Building has power ..." (19 hours and 36 minutes ago)
25.96 MHz: "... can see about eighty on the streets of Ketchelbank ... a few big groups, but they're spread out ... a few buildings with lights on ... serious collateral damage ..." (17 hours and 56 minutes ago)


Report to Process

12:22, 27 May 2009 (BST)

25.96 MHz: "... crossing Huntley Heights now, can see about sixty down there ... mostly just small groups ... a few buildings with lights on ... heavy structural damage ... the Vicari Building has definitely fallen ..." (21 minutes ago)

02:43, 27 May 2009 (BST)

25.96 MHz: "... can see thirty or so on the streets of Peppardville ... all stragglers, no groups ... a lot of buildings with lights on ... serious collateral damage ... the Maine Building is operational ... Fort Creedy is out of action ..." (2 minutes ago)

01:57, 27 May 2009 (BST)

25.96 MHz: "... maybe fifty in Kempsterbank ... a horde of thirty or so outside Neot General Hospital ... a lot of lights on, looks the area's been reclaimed ... only a few buildings damaged though ... power's on at the Dobbs Building ..." (34 minutes ago)

21:33, 26 May 2009 (BST)

25.96 MHz: "... crossing Buttonville now, can see thirty or so down there ... all stragglers, no groups ... lights are on across the suburb ... infrastructure looks intact too ... the Pryor Building has power ..." (11 minutes ago)

Recently Processed

15:05, 25 May 2009 (BST)

25.96 MHz: "... Roywood is still active, about forty on the streets ... mostly just small groups ... several buildings with power ... serious collateral damage ... power's back on at the Frauley Building ..." (15 hours and 42 minutes ago)

20:38, 25 May 2009 (BST)

25.96 MHz: "... reporting from Darvall Heights, I've got about eighty active ... a horde of twenty or so outside the Latrobe Building ... lights are on across the suburb ... some minor structural damage though ... some survivor activity in the Herman Building ..." (3 hours and 36 minutes ago)

14:20, 26 May 2009 (BST)

25.96 MHz: "... Randallbank is still active, about forty on the streets ... mostly just small groups ... a few buildings with lights on ... serious collateral damage ... lights are on in the Littlehales Building ..." (exactly 13 hours ago)

25.96 MHz: "... Pashenton is still active, twenty or so on the streets ... mostly just stragglers, no organised groups ... lights are on across the suburb ... infrastructure looks intact too ... power's back on at the Woolven Building ..." (12 hours and 40 minutes ago)

25.96 MHz: "... nearly a hundred in Santlerville ... a horde of about sixty outside the Dewes Building ... a lot of buildings with lights on ... some minor structural damage ... the Dewes Building is operational ..." (5 hours and 40 minutes ago)

25.96 MHz: "... can see maybe a dozen on the streets of Judgewood ... all stragglers, no groups ... a lot of lights on, looks the area's been reclaimed ... can't see a single ruined building ... the Ludlow Building has lights on ..." (exactly 5 hours ago)

25.96 MHz: "... about eighty in Scarletwood ... a horde of twenty or so outside St Telesphorus's Hospital ... a lot of buildings with lights on ... some minor structural damage ... power's back on at the Showers Building ... the Tompson Building is down ..." (2 hours and 40 minutes ago)

25.96 MHz: "... Havercroft is still active, a couple of dozen on the streets ... all stragglers, no groups ... lights are on across the suburb ... only a few buildings damaged though ... power's back on at Ackland Mall ..." (1 hour and 40 minutes ago)