EMRP: Reports to Process: Difference between revisions

From The Urban Dead Wiki
Jump to navigationJump to search
(Bot Edit. Processing Reports.)
Line 45: Line 45:


==Report to Process==
==Report to Process==
''List processed on 13:48, 3 July 2009 (BST).''
==Recently Processed==
===15:52, 2 July 2009 (BST)===
===15:52, 2 July 2009 (BST)===
25.96 MHz: "... twenty or so in Heytown ... all stragglers, no groups ... lights are on across the suburb ... infrastructure looks intact too ... the Usher Building has power ..." (15 hours and 7 minutes ago)
25.96 MHz: "... twenty or so in Heytown ... all stragglers, no groups ... lights are on across the suburb ... infrastructure looks intact too ... the Usher Building has power ..." (15 hours and 7 minutes ago)
Line 63: Line 65:


25.96 MHz: "... streets are looking clear in South Blythville ... power's on across most of the area ... infrastructure looks intact too ... Marven Mall has power ..." (2 hours and 27 minutes ago)
25.96 MHz: "... streets are looking clear in South Blythville ... power's on across most of the area ... infrastructure looks intact too ... Marven Mall has power ..." (2 hours and 27 minutes ago)
==Recently Processed==
===19:01, 28 June 2009 (BST)===
25.96 MHz: "... maybe fifty in New Arkham ... mostly just small groups ... a few buildings with lights on ... heavy structural damage ... the Denty Building is down ..." (16 hours and 35 minutes ago)
25.96 MHz: "... about forty in Danversbank ... a few outside Voss Lane Police Dept ... can't see any signs of life ... heavy structural damage ... the Kynaston Building is out of action ..." (16 hours and 15 minutes ago)
25.96 MHz: "... can see maybe fifty on the streets of Shackleville ... mostly just stragglers, no organised groups ... several buildings with power ... heavy structural damage ... the Raymond Building is in bad shape ..." (12 hours and 35 minutes ago)
25.96 MHz: "... maybe fifty in New Arkham ... mostly just small groups ... a few buildings with lights on ... heavy structural damage ... the Denty Building is down ..." (9 hours and 35 minutes ago)
25.96 MHz: "... reporting from Darvall Heights, I've got a hundred or so active ... a few big groups, but they're spread out ... several buildings with power ... serious collateral damage ... Caiger Mall is in bad shape ..." (9 hours and 15 minutes ago)
25.96 MHz: "... East Becktown is still active, about forty on the streets ... mostly just small groups ... several buildings with power ... serious collateral damage ... lights are on in the Sugg Building ... the Attwell Building is out of action ..." (8 hours and 35 minutes ago)
25.96 MHz: "... about forty in Grigg Heights ... maybe a dozen outside the Merson Building ... several buildings with power ... serious collateral damage ... the Merson Building is being held ..." (5 hours and 35 minutes ago)
25.96 MHz: "... Whittenside is still active, about forty on the streets ... mostly just small groups ... several buildings with power ... serious collateral damage ... power's back on at the Hurst Building ... Fort Perryn has fallen - repeat, Fort Perryn has ..." (4 hours and 55 minutes ago)

Revision as of 12:48, 3 July 2009

Can't be bothered to update all those EMRP pages by yourself? Then don't. Let the EMR Bot do it for you.

You can paste entire batches of reports from your events log onto this page. It takes just one edit here rather than two (or more) per report if you do it manually. Just follow the instructions below.

Adding Reports

Correct Formatting is VITAL!

Adding a Batch of New Reports

Create a level 3 heading with 5 tildes as the title, this will insert a timestamp. Like this but without the brackets: (===~~~~~===). Paste your reports underneath this new heading.

Take Note of these Points

-- If there are no reports to process, remove any comments under the "Reports to Process" header when you add more.

-- New batches of reports should go under older batches, to maintain chronological order.

-- Avoid posting duplicate reports where possible. Check the recently processed list at the bottom of the page.

-- If the reports are old enough that the timestamp isn't that accurate, sign with 5 tildes anyway, save, then edit the timestamp.

Example

Here's an example of what the page code should look like after you save it:

==Report to Process==
===18:18, 2 July 2008 (BST)===
25.96 MHz: "... leaving Reganbank, counted about forty outside ... they're just wandering around ... can't see any signs of life ... the whole suburb's wrecked ..." (5 hours and 36 minutes ago)
===14:18, 4 July 2008 (BST)===
25.96 MHz: "... reporting from Pashenton, I've got twenty or so active ... they're just wandering around ... lights are on across the suburb ... infrastructure looks intact too ... the Lance Building has power ..." (19 hours and 36 minutes ago)
25.96 MHz: "... can see about eighty on the streets of Ketchelbank ... a few big groups, but they're spread out ... a few buildings with lights on ... serious collateral damage ..." (17 hours and 56 minutes ago)


Report to Process

List processed on 13:48, 3 July 2009 (BST).

Recently Processed

15:52, 2 July 2009 (BST)

25.96 MHz: "... twenty or so in Heytown ... all stragglers, no groups ... lights are on across the suburb ... infrastructure looks intact too ... the Usher Building has power ..." (15 hours and 7 minutes ago)

25.96 MHz: "... maybe a dozen in Ruddlebank ... mostly just small groups ... power's on across most of the area ... only a few buildings damaged though ... the Cheeke Building has lights on ..." (14 hours and 27 minutes ago)

25.96 MHz: "... leaving Tollyton, counted thirty or so outside ... they're just wandering around ... can't see any signs of life ... the whole suburb's wrecked ... Woodroffe Mall is down ..." (13 hours and 47 minutes ago)

25.96 MHz: "... flying over Reganbank, can see thirty or so on the streets ... they're just wandering around ... a few buildings with lights on ... heavy structural damage ..." (11 hours and 47 minutes ago)

25.96 MHz: "... leaving Owsleybank, counted a couple of dozen outside ... mostly just stragglers, no organised groups ... a few buildings with lights on ... most of the buildings are ruined ... the Challes Building is in bad shape ..." (10 hours and 27 minutes ago)

25.96 MHz: "... leaving Tapton, counted thirty or so outside ... a few outside the Wagner Building ... lights are on across the suburb ... infrastructure looks intact too ... the Chaffin Building is being held ..." (6 hours and 27 minutes ago)

25.96 MHz: "... leaving Kinch Heights, counted a couple of dozen outside ... mostly just small groups ... a lot of buildings with lights on ... some minor structural damage ... the Nevill Building has power ..." (5 hours and 27 minutes ago)

25.96 MHz: "... Roywood is still active, thirty or so on the streets ... they're just wandering around ... can't see any signs of life ... it's a wasteland down there ... the Gilesi Building has fallen - repeat, the Gilesi Building has fallen ..." (3 hours and 27 minutes ago)

25.96 MHz: "... streets are looking clear in South Blythville ... power's on across most of the area ... infrastructure looks intact too ... Marven Mall has power ..." (2 hours and 27 minutes ago)