EMRP: Reports to Process

Can't be bothered to update all those EMRP pages by yourself? Then don't. Let the EMR Bot do it for you.

You can paste entire batches of reports from your events log onto this page. It takes just one edit here rather than two (or more) per report if you do it manually. Just follow the instructions below.

Adding Reports

Correct Formatting is VITAL!

Adding a Batch of New Reports

Create a level 3 heading with 5 tildes as the title, this will insert a timestamp. Like this but without the brackets: (===~~~~~===). Paste your reports underneath this new heading.

Take Note of these Points

-- If there are no reports to process, remove any comments under the "Reports to Process" header when you add more.

-- Avoid posting duplicate reports where possible. Check the recently processed list at the bottom of the page.

-- If the reports are old enough that the timestamp isn't that accurate, sign with 5 tildes anyway, save, then edit the timestamp.

Example

Here's an example of what the page code should look like after you save it:

==Report to Process==

===18:18, 2 July 2008 (BST)===

25.96 MHz: "... leaving Reganbank, counted about forty outside ... they're just wandering around ... can't see any signs of life ... the whole suburb's wrecked ..." (5 hours and 36 minutes ago)

===14:18, 4 July 2008 (BST)===

25.96 MHz: "... reporting from Pashenton, I've got twenty or so active ... they're just wandering around ... lights are on across the suburb ... infrastructure looks intact too ... the Lance Building has power ..." (19 hours and 36 minutes ago)

25.96 MHz: "... can see about eighty on the streets of Ketchelbank ... a few big groups, but they're spread out ... a few buildings with lights on ... serious collateral damage ..." (17 hours and 56 minutes ago)

Reports to Process

20:50, 12 January 2010 (UTC)

25.96 MHz: "... reporting from Lukinswood, I've got maybe a dozen active ... they're just wandering around ... a lot of buildings with lights on ... only a few buildings damaged ... power's on at the Stagg Building ..." (1 hour and 10 minutes ago)

17:27, 12 January 2010 (UTC)

25.96 MHz: "... leaving Roachtown, counted twenty or so outside ... all stragglers, no groups ... a few buildings with lights on ... the whole suburb's wrecked ... lights are on in the Chudley Building ... the Haim Building has fallen - repeat, the Haim Building ..." (17 hours and 44 minutes ago)

25.96 MHz: "... South Blythville is still active, about forty on the streets ... mostly just small groups ... lights are on across the suburb ... infrastructure looks intact too ... the Pippard Building has lights on ..." (10 hours and 4 minutes ago)

25.96 MHz: "... maybe fifty in Ketchelbank ... a few big groups, but they're spread out ... several buildings with power ... some minor structural damage ... power's back on at the Staples Building ... the Telfer Building is down ..." (8 hours and 24 minutes ago)

21:26, 11 January 2010 (UTC)

25.96 MHz: "... maybe a dozen in Grigg Heights ... all stragglers, no groups ... lights are on across the suburb ... infrastructure looks intact too ... lights are on in the Merson Building ..." (5 minutes ago)

18:49, 11 January 2010 (UTC)

25.96 MHz: "... leaving Wray Heights, counted twenty or so outside ... mostly just stragglers, no organised groups ... a lot of buildings with lights on ... some minor structural damage ... lights are on in the Fram Building ..." (8 minutes ago)

18:24, 11 January 2010 (UTC)

25.96 MHz: "... crossing Spicer Hills now, can see maybe fifty down there ... mostly just stragglers, no organised groups ... a lot of buildings with lights on ... serious collateral damage ... the Brockliss Building is down ..." (4 minutes ago)

16:48, 11 January 2010 (UTC)

25.96 MHz: "... reporting from Pennville, I've got thirty or so active ... mostly just stragglers, no organised groups ... a few buildings with lights on ... serious collateral damage ... Fort Perryn has definitely fallen ..." (16 hours and 8 minutes ago)

25.96 MHz: "... thirty or so in Kinch Heights ... mostly just stragglers, no organised groups ... several buildings with power ... some minor structural damage ... power's on at the Sharman Building ..." (15 hours and 48 minutes ago)

25.96 MHz: "... Pitneybank is still active, maybe seventy on the streets ... a horde of thirty or so outside Giddings Mall ... power's on across most of the area ... some minor structural damage ... Giddings Mall is operational ... the Farmer Building is looking ..." (4 hours and 48 minutes ago)

25.96 MHz: "... about forty in West Becktown ... mostly just stragglers, no organised groups ... a lot of buildings with lights on ... infrastructure looks intact ... power's on at the Sweeney Building ..." (3 hours and 8 minutes ago)

25.96 MHz: "... can see maybe seventy on the streets of Vinetown ... a horde of a couple of dozen outside Mitchem Mall ... lights are on across the suburb ... some minor structural damage though ... Mitchem Mall has power ..." (1 hour and 8 minutes ago)

Recently Processed

19:23, 10 January 2010 (UTC)

25.96 MHz: "... reporting from Crooketon, I've got twenty or so active ... they're just wandering around ... power's on across most of the area ... can't see a single ruined building either ..." (2 minutes ago)

17:34, 10 January 2010 (UTC)

25.96 MHz: "... Hollomstown is still active, about forty on the streets ... mostly just stragglers, no organised groups ... a lot of buildings with lights on ... some minor structural damage ... the Western Building is being held ... the Porter Building is in ..." (4 hours and 54 minutes ago)

25.96 MHz: "... maybe a dozen in Kempsterbank ... they're just wandering around ... a lot of buildings with lights on ... serious collateral damage ... power's on at the Dobbs Building ..." (54 minutes ago)

25.96 MHz: "... reporting from Lukinswood, I've got thirty or so active ... a few outside the Stagg Building ... a lot of buildings with lights on ... only a few buildings damaged ... the Stagg Building has lights on ..." (14 minutes ago)