EMRP: Reports to Process: Difference between revisions

From The Urban Dead Wiki
Jump to navigationJump to search
(Bot Edit. Processing Reports.)
Line 39: Line 39:


==Reports to Process==
==Reports to Process==
'''''List processed on:''''' 20:45, 26 July 2011 (BST)
===17:25, 27 July 2011 (BST)===
25.96 MHz: "... leaving Tapton, counted twenty or so outside ... mostly just stragglers, no organised groups ... a lot of buildings with lights on ... infrastructure looks intact ... lights are on in the Chaffin Building ..." (13 hours and 24 minutes ago)
 
25.96 MHz: "... West Boundwood looks clear ... several buildings with power ... only a few buildings damaged ..." (11 hours and 4 minutes ago)
 
25.96 MHz: "... looking quiet in East Grayside ... a lot of buildings with lights on ... infrastructure looks intact ... the Angerstein Building is being held ..." (8 hours and 44 minutes ago)
 
25.96 MHz: "... Brooksville is still active, maybe a dozen on the streets ... mostly just small groups ... power's on across most of the area ... infrastructure looks intact too ... the Foreman Building is operational ..." (6 hours and 4 minutes ago)


==Recently Processed==
==Recently Processed==

Revision as of 16:25, 27 July 2011

Can't be bothered to update all those EMRP pages by yourself? Then don't. Let the EMR Bot do it for you.

You can paste entire batches of reports from your events log onto this page. It takes just one edit here rather than two (or more) per report if you do it manually. Just follow the instructions below.

Adding Reports

Correct Formatting is VITAL!

Adding a Batch of New Reports

Create a level 3 heading with 5 tildes as the title, this will insert a timestamp. Like this but without the brackets: (===07:54, 10 May 2011 (BST)===). Paste your reports underneath this new heading.

Take Note of these Points

-- If there are no reports to process, remove any comments under the "Reports to Process" header when you add more.

-- Avoid posting duplicate reports where possible. Check the recently processed list at the bottom of the page.

-- If the reports are old enough that the timestamp isn't that accurate, sign with 5 tildes anyway, save, then edit the timestamp.

Example

Here's an example of what the page code should look like after you save it:

==Report to Process==
===18:18, 2 July 2008 (BST)===
25.96 MHz: "... leaving Reganbank, counted about forty outside ... they're just wandering around ... can't see any signs of life ... the whole suburb's wrecked ..." (5 hours and 36 minutes ago)
===14:18, 4 July 2008 (BST)===
25.96 MHz: "... reporting from Pashenton, I've got twenty or so active ... they're just wandering around ... lights are on across the suburb ... infrastructure looks intact too ... the Lance Building has power ..." (19 hours and 36 minutes ago)
25.96 MHz: "... can see about eighty on the streets of Ketchelbank ... a few big groups, but they're spread out ... a few buildings with lights on ... serious collateral damage ..." (17 hours and 56 minutes ago)

Reports to Process

17:25, 27 July 2011 (BST)

25.96 MHz: "... leaving Tapton, counted twenty or so outside ... mostly just stragglers, no organised groups ... a lot of buildings with lights on ... infrastructure looks intact ... lights are on in the Chaffin Building ..." (13 hours and 24 minutes ago)

25.96 MHz: "... West Boundwood looks clear ... several buildings with power ... only a few buildings damaged ..." (11 hours and 4 minutes ago)

25.96 MHz: "... looking quiet in East Grayside ... a lot of buildings with lights on ... infrastructure looks intact ... the Angerstein Building is being held ..." (8 hours and 44 minutes ago)

25.96 MHz: "... Brooksville is still active, maybe a dozen on the streets ... mostly just small groups ... power's on across most of the area ... infrastructure looks intact too ... the Foreman Building is operational ..." (6 hours and 4 minutes ago)

Recently Processed

19:40, 26 July 2011 (BST)

25.96 MHz: "... looking quiet in Williamsville ... power's on across most of the area ... infrastructure looks intact too ... the Forst Building is being held ..." (4 hours and 59 minutes ago)

25.96 MHz: "... about sixty in Penny Heights ... mostly just stragglers, no organised groups ... lights are on across the suburb ... serious collateral damage though ... the Rothwell Building has power ... the Craddy Building is in bad shape ..." (1 hour and 19 minutes ago)

25.96 MHz: "... flying over Kinch Heights, it's looking empty ... a lot of buildings with lights on ... infrastructure looks intact ... the Nevill Building has lights on ..." (19 minutes ago)

13:53, 26 July 2011 (BST)

25.96 MHz: "... Pimbank is still active, about forty on the streets ... they're just wandering around ... can't see any signs of life ... the whole suburb's wrecked ... looks like Tynte Mall has fallen ..." (32 minutes ago)

11:15, 26 July 2011 (BST)

25.96 MHz: "... flying over Pashenton, it's looking empty ... power's on across most of the area ... only a few buildings damaged though ... lights are on in the Woolven Building ..." (13 hours and 55 minutes ago)

25.96 MHz: "... flying over Starlingtown, can see twenty or so on the streets ... mostly just stragglers, no organised groups ... several buildings with power ... heavy structural damage ... the Veryard Building has lights on ... the Casely Building is in bad ..." (5 hours and 55 minutes ago)